Health Care Spending Essay

In the past seven decades health care spending has been increasing tremendously. The industrial era brought in a new system to help population duel with the cost of medical care. New technology has become a much needed investing in the 21st century which has yield to a great margin between small and big facilities. When looking at all of these factors there is no wonder the nation is spend way too much money on health care, although at times might seem that there is not enough. It seems that the right investment is needed to help aid those that need help the most the elderly and unemployed, with the economy in a fragile state and unemployment rates increasing with the quarters there is no question that decisions about how we are spending on health care needs to change. Even though so many factors are involved in the spending this paper would focus on our current level of expenditures, how and where is the money spent, forecasting what would be coming next. Current level of national healthcare expenditures According to â€Å"Physicians for a National Health Program† (2012), â€Å"National Health Expenditures was $2.8 trillion, and the spending as a percent of GDP was 18% for 2012† (National Health Expenditure Projections: Modest Annual Growth until Coverage Expands and Economic Growth Accelerates). When looking at these facts many would even argue we are spending quite enough when it comes to healthcare or perhaps too much, however is the complete opposite not enough spending is in the right place. These figures does not represent the spent on one area of health care the graph below will provide an idea as to what, when, and where was spent on 2009. Total = $2.3 Trillion Source: Martin A.B. et al., â€Å"Growth In US Health Spending Remained Slow in 2010; Health Share of Gross Domestic Product Was Unchanged from 2009,† Health Affairs, 2012. As shown on the graph 51% of the spending is towards hospital care and physician/clinical services which are great to be invested in, however the rest of the spending in my opinion is not proportionally distribute, yes those areas are extremely important but it would be beneficial if more can be distributed along medication, and other professionals services to include the testing and diagnose of serious illnesses such as cancer. The investment is require to subsidize the needs on these areas, 45 percent of people under age 65 who don’t have insurance coverage for prescriptions said they had not filled a prescription in the last year because of the cost. Additionally, 84 percent of working-age people in the U.S. without insurance coverage for prescriptions said they had taken some action such as spending less on groceries or postponing paying other bills in order to pay for their medications, an increase from 71 percent last year (Rowan, 2012). Regarding testing for patients with cancer there should be more funding for the new technology available for test that many patients are not aware, because they cannot afford it or simply because it is not available in their area. Spending: Too much or not enough? In 2010, $2.6 trillion was spent on health care services and products, 61 percent of which purchased hospital care, physician and clinical services, and retail prescription drugs. Private health insurance paid for 33 percent, out-of-pocket sources for 12 percent, and other third party payers and programs for 7 percent. The two largest government health care programs, Medicare and Medicaid, purchased $925.1 billion worth of health care goods and services in 2010, accounting for 36 percent of total health care spending (Centers for Medicare and Medicaid Services, 2012). The increase of cost would continue to rise according to economists, health care managers, and advisors forcing for a new reform to change the system. Thus many are not too please with this idea is a phenomenal that cannot be avoid, there is a need to change in policies and methods in which we spent or invest in health care. Suggesting that the investment is too little would be a denial statement, everyday more and more patients are relying on programs such as Medicare and Medicaid to get the attention required at the moment. As the economic recession set in deeper less would be available to afford just the basic needs, medication or any treatment; unemployment rates are on the rise and it does not seem it would stop anytime soon. Although the new reform would try to establish some type of stability, until the insurance companies and policy makers come to an agreement to provide a universal premium for service which can be affordable for all, the same problems would continue to emerge. Many factors also have effect on spending considering for example the demand for new technology in the 21st century; this trend has become to some degree a factor in the rise on health care spending. Much of this new technology is beneficial if it provides a new way to used already establish technology, however many studies have revealed that most of them are only here to replace such technology and at some circumstances increase the cost of service. As a country a deeper consideration of such technology is needed not only to save money, but to invest wisely as to what would help the system cut in spending. Future economic needs of health care For years to come the enduring effects of the economic recession and slow recovery, due mostly because of partial growth in incomes, are expected to continue to limit health spending growth. In 2014 the coverage expansions laid out in the Affordable Care Act for Medicaid and for private health insurance are expected to increase the growth rate for health spending, with notable increases expected in spending on physician services and prescription drugs for newly insured patients. By the end of the year, higher income growth and the continuing shift of baby boomers into Medicare are expected to cause health spending to grow roughly two percentage points faster than overall economic growth, which is about the same differential experienced over the past thirty years. Therefore a necessary reform of a national health care perhaps would provide the change needed, the only issue with this suggestion is the funding. Thus a national health care would help every citizen reach the so needed medical attention required at an affordable price there is no surprise that the funding through Federal programs are thinning, and the cost of private insurance keeps on raising. Therefore a more evaluated reform should be put in place where the cost of care should be regulated, and more affordable options are given to the population; an increase on reimbursement of healthcare for basic health needs is necessary to subsidize the cost for complex health needs in order to keep the cost regulated. According to â€Å"Centers For Medicare And Medicaid Services† (2011), â€Å"In 2014, national health spending is projected to rise to 7.4 percent, or 2.1 percentage-points faster than in the absence of reform, as the major coverage expansions from the Affordable Care Act (ACA) are expected to result in 22 million fewer uninsured people† (National Health Expenditure Projections 2011-2021). Increases in Medicaid spending growth, and private health insurance growth will contribute to the overall acceleration in national health spending in 2014. There is no question that technology would also continue to raise to help the system provide the best and fast way possible services to those in need. Investing more in health care can only benefit the nation; however the right decisions needs to be made in order to keep the spending growth under control. Reference Centers for Medicare and Medicaid Services. (2012). Retrieved from http://www.cms.gov/Research-Statistics-Data-and-Systems/Statistics-Trends-and-Reports/NationalHealthExpendData/downloads/dsm-10.pdf Centers for Medicare and Medicaid Services. (2011). Retrieved from http://www.cms.gov/Research-Statistics-Data-and-Systems/Statistics-Trends-and -Reports/NationalHealthExpendData/Downloads/Proj2011PDF.pdf Martin A.B. et al., â€Å"Growth In US Health Spending Remained Slow in 2010; Health Share of Gross Domestic Product Was Unchanged from 2009,† Health Affairs, 2012. Physicians for a National Health Program. (2012). Retrieved from http://www.pnhp.org/news/2012/june/2012-health-care-spending-including-administration Rowan, K. (2012). Fox news.com. Retrieved from http://www.foxnews.com/health/2012/09/13/why-americans-prescriptions-are-going-unfilled/

Paper on Cold-Rolling of Steels in Pil

[pic] INTRODUCTION ABOUT PENNAR INDUSTRIES LIMITED Pennar industries limited are a multi-product, multi-location enterprise. The company manufactures six different products. †¢ Cold rolled steel strips †¢ Cold rolled form sections †¢ Engineering components †¢ Road safety systems †¢ Precision tubes †¢ Fabrication Pennar industries has received the ISO 9001,2000 quality certification from RWTUV of Germany and committed to achieving excellence in the quality of product. The CRSS division, with its units at Patancheru, Isnapur and Chennai has combined annual cold rolling capacity of 1,20,000 Metric Tons. Pennar manufactures Steel Strips from 600mm to 750mm width and thickness range of 0. 25 to 5. 00mm both in coil and sheet form. Pennar caters to a wide range of customers from various sectors like: †¢ Automobiles †¢ Wide goods †¢ Domestic appliances †¢ Bearings †¢ General engineering industries FACILITIES: †¢ Quality control measures at every stage of the manyfacturing process, right from the selection of raw material to chemical analysis using spectrometer. †¢ Semi-continuous push-pell type pickling lines feed the rolling mill with scale free,iled and bright HR coils. †¢ PLC-Controlled MECON WEAN UNITED 4-HI Rolling Mill. Bell type annealing furnaces for heat treating of cold rolled steel strip †¢ Skin pass mills. CR Slitting lines and Cut to length lines. †¢ Every process is closely monitored and end products are subjected to a battery of tests to determine Hardness, Tensile strength, Yield strength,% of Elongation, cupping test and Bend test in order to meet stringent customer specification. †¢ Finished products are carefully packed, using polythene and gunny for coils and poly craft and wooden/steel pallets for sheets to provide total protection to the products during transit and handling. Pennar Industries group is well known for fulfilling their commitments. Many times they have been awarded and rewarded. [pic] PROCESS FLOW CHART (COLD ROLLED CLOSE ANNEALED STEEL STRIP) [pic][pic] RAW MATERIAL AND SOURCES The raw material for production of CRSS is ‘Hot Rolled Steel coils’ and these HR coils are produced by using â€Å"primary roughing mills† which is a 2-HI reversing mill with a 0. 6 to 1. 4 mm diameter rolls. The main purpose of the mill is to reduce casting ingots into blooms. The work piece has to be pass 10-20 times between the rolls, to have a desired width, the work piece is made to pass through â€Å"edge grooves†. HR colis are also produced in ‘Universal Mills’ without edge grooves. These coils are mainly low carbon steels which are either ‘Si’ or ‘Al’ killed. Specifications: Range 1. width 1350-1800 mm 2. Thickness 5-6 mm Ultimate Tensile strength 80 kg /mm2 Yield strength 40 kg/mm These Hot rolled coils are exported from many places like JINDAL STEEL WORKS (Karnataka), LLOYD STEELS LTD (Maharashtra), ESSAR STEELS LTD (Gujarat), ISPAT INDUSTRIES LTD (Maharashtra), SAIL etc.. There will be a sticker present on every HR coil and it will be as follows†¦ ISPAT INDUSTRIES LTD DIST-RAIGAD, MAHARASHTRA, INDIA Heat Number : 08201137 Coil Number : 0820113706/0 Grade/Specification : WG29AC Batch Number : 0001063785 Invoice Number : 2180040447 Invoice Date : 07. 05. 08 Net Weight : 23. 700MT / 52258. 501lbs Size : 1250. 00mm x 4. 00mm x mm Customer :Pennar Industries Limited Purchase Order No : 0021047514 A sample of these HR coils is taken and it is sent to spectroscopy lab for chemical analysis. SPECTROSCOPY Chemical analysis: Chemical composition of steels is checked by means of SPECTRO. Generally C, Si, Mn, P, S, Cr, Mo, Ni, Al, Cu, Nb, Ti, V, Sn, B, and N are analyzed. Test procedure for spector is as below. Preparation of sample: ? The sample must be free from slag inclusions, rust, grease, oil, fracture, voids. ? The sample must be handy for polishing. ? The dimension of the sample must be fit on the spark stand. ? The sample must be flat (to get completely seated on the spark stand). The sample is prepared on the abrasive disc grinder by using suitable abrasives having 60 grade coarseness. Method of Testing: The spectro lab is switched on half-n-hour before sparking for warming up. The spark stand is flushed with grade-I argon for few seconds before sparking. Before sparking the unknown, the primary standard/internal standards are sparked and results are compared. If the resul ts found to be ok sparking of the unknown sample is carried out by keeping the prepared unknown samples on spark stand in inverted position and is clamped and sparking is carried out. If the results are found not ok, the spectro lab is standardized with setting up samples (RE12, RE13, RE14, 5 SUS 5) supplied along with spectro lab. |[pic] | Each sample is sparked for minimum 2 times and the average results are recorded and print is taken out and the composition is known. These HR coils are sent to HR slitters.. HR SLITTERS Hot rolled coils are slitted as desired to provide material for cold-rolling. For slitting of HRSI in 1350 mm whereas HRSII is 1800 mm. he different parameters the coils,two slitters HRSI and HRSII are in use. The maximum slitting width are: Coil parameter input coil output coil Coil I. D500mm (or) 880mm 500 mm Coil O. D 1800 mm 1370(max) Coil weight 30 Tons(max) 10 tons(max) Strip thickness 5 mm – 8 mm 5 mm – 8 mm Width 1500 mm(max) 1500 mm(max) Line speed:250m/min. | |HOT ROLLED SLITTER | |[pic] | | | PICKLING Immersion of a metal component in a solution which is preferentially remove oxides and mill scales, with little effect upon the underlying metal. Solutions are usually acids or alkalies, often with addition of an inhibitors to minimize attack on the underlying metal. Typical solutions for plain carbon steels are: 5% HCl + 0. 05% Galvene at 15-500 C PROCESS: The aim of pickling is to remove the oxidation scales & rust formed during hot rolling. Initially the HR slitted coil strip is passed through three tanks called the ACID TANKS or PROCESS TANKS (Tanks 1, 2 & 3) in which the commercial HCL (Hydro Chloric Acid) acid is present with maximum concentration of 20%. In this pickling all the rust and scales on the sheet are removed. Once the sheet is passed through acid tanks it is then passed through rinse water tanks 1, 2 and 3. This is done so because after the coil is passed through the acid tanks the acid will be present on the coil/sheet. When we clean with soft water then it becomes safe for the operator. Once the coil/sheet is rinsed there are chances of getting corroded again that are why water is drained away from the coil/sheet by hot air drier and finally applied emulsion (Castrol) oil on the coil to prevent corrosion. The specifications of acid tanks 1, 2 and 3 are listed below: Acid Tank -1 Acid concentration : 2-7% % Iron content : 22max Temperature : 55-70oC Acid Tank-2 Acid concentration : 6-12% % Iron content : 22max Temperature : 50-65oC Acid Tank-3 Acid concentration : 9-16% Iron content : 20max Temperature : 45-60oC Types of pickling equipment: †¢ Cage picklers †¢ Push pull picklers †¢ Semi-continuous pickle lines †¢ Shallow picklers †¢ Turbulent pickling †¢ Spiral pickling. In pennar industries, we use semi-continuous pickling . [pic] The main reactions which take place during pickling are: Fe0+2HCl ( FeCl2+H2O Fe+2HCl ( FeCl2+H2 Care should be taken during pickling to pre vent the pitting, small holes and formation of spots on the coil due to over pickling will reduce the thickness of the sheet. When the pickling process is going on, by titration process we have to check he percentage of acid and iron in the tanks. TITRATION PROCESS: Titration process is carried out to know the percentage of iron and acid content in the tanks. This is because if the iron content exceeds the permissible level(20% Fe Content) in acid tank, then acid is to be taken off and new acid is added in the tanks to carry out pickling. Take 20ml of distilled water in a conical flask. Add 0. 2ml of Hydrochloric acid (HCl) to it. Then add few drops of acid indicator named Bromophenol blue AR with chemical formula C19H10O5SBr4 to obtain yellow coloured solution. Take Sodium Hydroxide (NaOH) in a burette and note down the initial reading. Start titrating with NaOH solution till brown coloured solution (i. e. end-point) is obtained. Note down the final reading. The difference of the final and the initial reading is determined. From the table, the corresponding percentage of acid is noted down. Then add few drops of Orthophosphoric acid to neutralize the solution. Add few drops of iron indicator named Barium Diphenylamine Sulphonate GR with chemical formula C24H20BaN2O6S2 to obtain yellow colured solution. Take Potassium Dichromate (K2Cr2O7) in a burette and note the initial reading. Start titrating with K2Cr2O7 solution till brown coloured solution (i. . end-point) is reached. Note down the final reading. The difference of the final and the initial readings is determined. From the table, the corresponding percentage of iron is noted down. OBSERVATIONS: 1. Titration with NaOH: Initial Reading : 25. 2 Final Reading : 26. 9 Difference : 1. 7 From the table, 3. 06% of acid. 2. Titration with K2Cr2O7: Initial Reading : 22. 9 Final Reading : 29. 0 Difference : 6. 1 From the table, 17. 08% of iron content. NOTE: After pickling recoilng is carried out with tension and apply the emulsion oil to prevent corrosion. These pickled coils are processed to next stage i. e. , cold rolling. COLD ROLLING COLD ROLLING is the process where the material is deformed plastically by passing it between rolls below recrystallisation temperature. In pennar industries cold rolling is done by 4HI Reversible Cold Rolling Mill. The name itself indicates that it is a reversible mill i. e. the rollers can rotate in forward as well as in reverse directions. In 4 HI Rolling mill, there are four rollers, of which two are back-up rolls and another two are work rolls. The load is fed to the back-up rolls and the sheet is passed through the work rolls. The back-up rolls act as the driving rolls and the work rolls as driven rolls. The direction of driving and driven rolls is opposite to each other. [pic] 4 HI-COLD REVERSING MILL PROCESS: Pickled coils are reduced to final gauge at the 4HI mill by forward and reverse rolling with load applied on the work rolls through the SCREWDOWN MECHANISM. The coils are placed on the coil car by an EOT crane. The coil car is moved towards the mandrel to load it. After loading on the mandrel the coil is fed into the work roils through the pay off reel to the delivery tension mandrel (DTR). From DTR the coil is passed through rolls to Entry Tension Reel (ETR). The coil is reduced in each pass according to the required thickness. Most care is taken during rolling to maintain required tension and speed such that the possibilities of rolling defects are minimum. The pass from the pay-off to DTR is known as the first pass and for the second pass the coil is sent from DTR to ETR. The number of passes depends on gauge reduction / final requirement. The diameters of the back-up rolls are 610mm and the work rolls are of 225mm. The barrel lengths of the rolls are 700mm and 768mm. There is a gear box present for the screw down load. There are primary and secondary motors. The ratio of primary motor is of 1:16 and that of secondary motor is 1:32. The pitch of the screw down screw is 8mm and diameter is 180mm. At the weld portion the mill is slow down and the number wraps at which weld passed the roll bite is noted down the direction of rolling reversed. The tail end is clamped to the entry tension reel . tension and load are applied and level is checked. Guage is checked by the help of non contact guage and the mill is operated at higher speeds. The operation is repeated till the doil is finished to the final guage. Final pass reduction is maintained low i. e. , 8%-16%. To maintain shape coil is wounded on low tension. Final pass thickness is checked at operating and drive sides and it is maintained throughout the strip by adjusting load and tension after the rolling operation is over the coil end lap is wound,and bonded and transferred to the skid. TECHNICAL DATA ON ROLLING: MILL MANUFACTURES: Latest computer controlled MECON WEAN UNITED 4 HI cold reversing Mill GRADES : Mild steel[DDDEDDEDDSMEDIUM] SPECIFICATIONS : IS 513, IS 4397,IS 4030 STRIPSHEET WIDTH : 25 mm to 630 mm THICKNESS : 0. 25 mm to 6. 00 mm SURFACE FINSH : Bright, Fine Matt, Matt, Rough. BACK UP ROLL DIA : 610 mm to 567 mm WORK ROLLS DIA : 225 mm WORK ROLL LENGTH : 700 mm After cold rolling process, the grains are enlarged the coil becomes very hard due to work hardening and internal stresses that are developed in the material. In order to restore ductility and relieve internal stresses of the material ANNEALING has to be done. ANNEALING Annealing is the process of heat treatment by which the metal very ductile. It is also used to homogenize the material, composition by diffusion and it relieves the residual stresses which are arising from cold working. It also results in grain refinement by recrystallisation process. The temperature to which the metal is subjected and the time for which the temperature is maintained depends upon the parent metal and the particular properties that are desired on the final stage. In pennar industries annealing is generally carried out for following reasons:- ? To obtain softness. ? To increase or restore ductility. ? To relieve internal stresses. ? To refine grain structure. To homogenize the mechanical properties. In Pennar Industries SUB CRITICAL ANNEALING is carried out (below recrystallisation temperature). SUB CRITICAL ANNEALING Is a method of annealing while include heating of metal to the metal below the lower critical temperature. I. e. below 737C. Soaking for some time and cooling at a very slow rate in the furnace it self. ANNEALING PROCEDURE: Gener ally, Annealing is carried out in bell type furnaces or Electric arc furnaces which uses diesel and LPG as a fuel and temperature will be regulated by the fuel supply to undergo annealing process. BELL TYPE FURNACE [pic] TECHNICAL DATA: FURNACE : Apex and allied COIL DETAILS : OD 1200 -1700 ID 400 OR 500 CHARGE WEIGHTS : 30000 TO 40000 CHARGE HEIGHT : 2650 MM (MAX) FURNACE TEMP : 960 (MAX) FLOW METER FOR NITROGEN GAS: TEMPERATURE :86 0 C(MAX) PRESSURE : 1 PSI (MAX) The different stages in annealing process are as follows: Charging: The coils are stacked on the base in such a way that coils with decreasing diameter will be arranged from bottom to top. The coil should be stacked with centers of the coils and axis. If furnace stacking should be absolutely concentric so that uniform gap is obtained between the coils and inner cover. The intermediate concentricity should be provided between all the coils to ensure good circulation. Purging: The inner hood shall be brought on to the charge and fixed to the base. The protective gas flow starts at a rate of 15 Nm3/ hour and maintained for about 45 min, so that the initial air in the hood is fully replaced by the protective gas. This process is called as purging process. Heating: After the charging space has been filled with HYDROGEN and NITROGEN and flow rate of around 15m/hr, the heating can be commenced. All the settings and attachments needed to start the furnace are finished. The rate of heating depends upon the charge weight, % of reduction and carbon equalent. Generally heating rate is 40c/hour upto 520c and 30c/hour from above 520c. In PENNAR INDUSTRIES fired furnaces are used for heating. When the temperature at the thermocouple reaches the set point the fuel supply will be regulated periodically. Soaking: Maintaining the specific temperature of charge for required hours , is known as soaking. In the process the charge coil are soaked for some hours depending upon the different qualities of coils, under the required temperature. When the soaking is over, an audio alarm is given and the furnace is automatically disconnected by the central controls. The annealing cycle comes on end. Cooling: The furnace is removed from the base and cooling hood is brought on the base to expand the cooling process. The cooling hood is removed when the charge temperature reaches about 90c. At 90c the charge is ready for loading. After cooling, the coils are discharged from the base and are placed for air cooling. The coils are cooled completely for room temperature in 2 to 3 hrs, after which they are processed further. PSL consists of 33 bases, 14 furnaces and 16 cooling hoods in annealing yard. The loading capabilities of different bases are given. Bases capacity(tons) 22. 15-20 33. 25-30 Technical characteristics: Charge materials : MS,D,DD,EDD Stack height :2650 mm(max) Estimated coil dia : 1600(max) Charge temperature :300 C Annealing temp : 7300 C Bell furnace temp : 9000 C Flow of protective gases: During purging ;14 Nm3/hr During heating :8-10 Nm3/hr During cooling :2 Nm3/hr PROTECTIVE GAS PLANT Protective Gas plant is operated for producing Nitrogen in pennar steels ltd. Equipment:- In Pennar steels the Nitrogen gas produces from air by absorption with pure drier and ammonia cracker unit. PLANT CAPACITY :60 N. M3 HR TYPE :PSA 60. 7. 10 + DEOXO/NLPD 60. 7+CU 60. 7+NH3 -10E ANALYSIS :HYDROGEN APPROX 4% BY VOLUME OXYGEN MAX 10 PPM AMMONIA MAX 10-20PPM NITROGEN+RARE GASSES-BALANCE DEW POINT :APPROX 40 C WITH DELIVERY PRESSURE CONSUMPTION : GAS AMMONIA APPROX 1. 8 KG/HR AT MAX VALUES PRESSSURE OF 18 KG/CM2 POWER APPROX :49. 87 KWH/HR COOLING WATER :12. 5 M3/HR TEMP INLET : 300C TEMP OUTLET :400C PRESSURE :2-3 KG/CM2 SKIN PASS The annealed cold rolled strip is very limited in its usage because of the yield point phenomenon. When annealed strip is processed in the dead soft condition, it tends to yield unequally manifesting luder lines or stretcher strains. This is the process manifestation of the break in the stress strain curves. If luder lines are to be avoided, this thing has to be smoothened as shown in the adjacent curve. This is achieved by the process of skin pass where the strip is given a very minor reduction of the order of 1. % max elongation. This makes the strip surface tough but the interior of the strip retains the softness so that when further drawing operations are carried out, the strip forms smoothly without any evidence of luder lines. The other advantages of temper rolling are as follows: ? Providing desired finishes such as matt or bright on the strip surface ? Imparting flatness to the strip ? Breaking up spangles from galvanized strip Skin pass process:- |[pic] | Skin pass is a process of applying a regulated and very low load on the material in the mill it self. The reduction of thickness in skin pass is just below 5% reduction. The skin pass operation is a single pass operation unlike reduction in the rolling mill. The operation is similar to rolling but only one pass from pay off reel to delivery reel is giving with minimum load and with required surface finish work rolls and with proper tension. Anticrimping rolls are used in the skin pass for good shape control and to go flat surface. Surface roughness of the material is measured with the help of surface roughness checking unit i. . ,SURTRONIC-10. After the skin pass a sample is taken from the strip and it is sent to quality assurance department to find out the different properties like UTS,YS,elongation,hardness,drawability and bending. QUALITY ASSURANCE DEPARTMENT Various mechanical test has to be done on the sample taken from the product(coil) to prove its quality. The various machine ry in use,in QAD are †¢ Vacuum spectroscopy †¢ Rockwell Hardness Machine †¢ Vickers hardness machine †¢ Universal testing machine †¢ Ericsson testing machine †¢ Optical microscope. HARDNESS TEST: Hardness is defines as â€Å"Resistance of metal to plastic deformation, usually by indentation. However, the term may also refer to stiffness or temper, or to resistance to scratching, abrasion, or cutting. It is the property of a metal, which gives it the ability to resist being permanently, deformed (bent, broken, or have its shape changed), when a load is applied. The greater the hardness of the metal, the greater resistance it has to deformation. There are three types of tests used with accuracy by the metals industry; they are the Brinell hardness test, the Rockwell hardness test, and the Vickers hardness test. ROCKWELL HARDNESS TEST: The Rockwell Hardness test is a hardness measurement based on the net increase in depth of impression as a load is applied In the Rockwell method of hardness testing, The indenter may either be a steel ball of some specified diameter or a spherical diamond-tipped cone of 120? angle and 0. 2 mm tip radius, called Brale. The type of indenter and the test load determine the hardness scale(A, B, C, etc) A minor load of 10 kg is first applied, which causes an initial penetration and holds the indenter in place. Then, the dial is set to zero and the major load is applied. Upon removal of the major load, the depth reading is taken while the minor load is still on. The hardness number may then be read directly from the scale. SCALES AND VALUES: The different scale used for different materials are tabulated as follows: |Various Rockwell scales[7] | |Scale | VICKERS HARDNESS TEST: Vickers hardness is a measure of the hardness of a material, calculated from the size of an impression produced under load by a pyramid-shaped diamond indenter. Devised in the 1920s by engineers at Vickers, Ltd. , in the United Kingdom, the diamond pyramid hardness test, as it also became known, permitted the establishment of a continuous scale of comparable numbers that accurately reflected the wide range of hardnesses found in steels. The indenter employed in the Vickers test is a square-based pyramid whose opposite sides meet at the apex at an angle of 136?. The diamond is pressed into the surface of the material at loads ranging up to approximately 120 kilograms-force, and the size of the impression (usually no more than 0. 5 mm) is measured with the aid of a calibrated microscope. The Vickers number (HV) is calculated using the following formula: HV = 1. 854(LD2) [pic] with L being the applied load (measured in kilograms-force) and D2 the area of the indentation (measured in square millimetres). The applied load is usually specified when HV is cited. As a result of the latitude in applied loads, Vickers testers is applicable to measuring the hardness of very thin sheets as well as heavy sections. The specimen is taken from the strip and indentation is done by using both vicker and Rockwell and then the values of Vickers and Rockwell is tabulated . TENSILE TEST:- Tensile test is done to know the tensile strength, yield strength and percentage elongation of the material whether they are in specified limits of the customer tolerances are not. Tensile test values apply to transverse specimen in case of sheets/strips. Strips having a width of 250mm and below shall be tested longitudinally. UNIVERSAL TESTING MACHINE [pic] PROCEDURE:- Tensile test is widely used to determine strength, ductility, toughness, resilience and several other material properties. A test specimen of rectangular crossection of 20mm width of suitable length is prepared from the material to be tested. During the preparation of the sample to avoid sharp sides by deburring the sample with the help of file, this reduces the chances of failures of specimen at low stress values. After this the specimen is held by suitable means between the two heads of a testing machine and subjected to a progressively increasing tensile load till the specimen fractures. A record of the load acting on the specimen with progressive extension of the specimen is obtained. YIELD STRENGTH:- Most non ferrous materials and high strength steels do not possess a well defined yield point. For these materials the maximum useful strength is the yield strength. The yield strength is the stress at which the material exhibits a specifies limiting deviation from the proportionality of stress to strain. This value is usually determined by the â€Å"off-set method†. The value of off-set method is generally between 0. 1 and 0. 2 % of the gauge length. The value of yield strength can be calculate by YS = ((DIVISIONS * LOAD) / (WIDTH * GAUGE)) = †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. N/sq. mm Here, the divisions are obtained from the graph between stress and strain given by the UTS machine. The experimental values are tabulated. DUCTILITY: The ductility of material is indicated by the amount of deformation i. e. , possible until fracture. This is determined in tension test by two measurements ELONGATION: This is determined by fitting together, after fracture, the parts of the specimen and measuring the distance between the original gauge marks Elongation=(Lf-Lo)/ LoX100 Where Lf-Final gauge length Lo- Original gauge length In reporting percentage elongation, the Original gauge length must be specified since the percentage elongation will vary with gauge length Elongation is carried out in UTS machine and the values are obtaines in either 50 GL 80 GL. The experimental values are tabulated: ULTIMATE TENSILE STRENGTH: The value of ultimate tensile strength gives the maximum stress that the strip can with stand before fracture and this value can be calculated by the graph obtained from the universal testing machine. The graph plotted in between the load applies and strain. UTS = (LOAD/(WIDTH * GAUGE)) = †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. N/sq. mm EXPERIMENTAL DATA Mechanical Properties: | |S/P ID |MIDDLE |S/P OD | |COIL NO |83215-A |83215-A |83215-A | |SIZE |492 X 1. 8 |492 X 1. |492 X 1. 8 | |QUALITY |D |D |D | |SPECIFICATION |S/P (ID) |CTL (M) |S/P (OD) | |GAUGE |2. 0 |1. 8 |1. 78 | |WIDTH |20. |20. 2 |20. 3 | |LOAD |14000N |10206N |12370N | |UTS |348. 25N/sq. mm |320. 72N/sq. mm |342. 37N/sq. mm | |HRB |59 |57 |57 | |YS |250. 7N/sq. mm | |271. 25N/sq. mm | |ELONGATION | | | | |80GL |41 |40 |38 | |50GL |47 |46 |44 | |S/P ID |MIDDLE |S/P OD | |COIL NO |83312-A |83312-A |83312-A | |SIZE |408 X 1. 2 |408 X 1. 2 |408 X 1. | |QUALITY |EDD |EDD |EDD | |SPECIFICATION |S/P (ID) |CTL (M) |S/P (OD) | |GAUGE |2. 4 |1. 22 |1. 29 | |WIDTH |20. 2 |20. 3 |20. | |LOAD |14000N |6870N |7470N | |UTS |288. 77N/sq. mm |277. 39N/sq. mm |285. 25N/sq. mm | |VPN/RHN |75 |42/43 |44/45 | |YS |235. 14N/sq. mm |214. 81N/sq. mm |265. 14N/sq. m | |ELONGATION | | | | |80GL |40 |41 |41 | |50GL |46 |47 |47 | COLD ROLLED SLITTING The width of the coil at the time of HR Slitting is planned such that the width at which the material is rolled will be generally in multiples of the requirements. Also at the time of rolling the edges of the sheet will be damaged. So in order to remove the spoiled edges the cold roll slitting is done. The slitting of the coil is done according to work order. The main purpose of slitting is to ensure that:- 1. width is always as per the W. O requirements and the properties are also ensured 2. sufrace of the strips on both sides is to be ensured as free from defects such as rust, pits, holes,scales,dents,unslit edges, laminations,patches,scratches,scoring and other defects which disturbs the end products 3. hape,cambers and other requirements has given in the W. O are totally ensured. 4. Rust preventive oil is applied uniformly on all sheets or wraps. PROCESS: The coils are placed on the coil car by EOT cranes. The coil mandrel is expanded to grip the coil and binding strap is cut. The uncoiler is inched by the inched drive and the load end is separated from the coil. The load end is taken to the entry pinch roll, hold down roll is lifted and fu rther threading is done by jogging pinch roll drive. [pic] | Side guide is adjusted to the correct width. The slitter drive is jogged and load end is passed ahead of the slitter. The loop pit table is transverse over the pit by jogging slitter. The slit stands are taken to drag wise over the loop pit table which is separated and threaded to recoiler. The slit stands are passed properly in the rewind mandrel. The drag vice is closed and few wraps are taken by jogging and the recoiled is under low tension. The scrap is threaded to scrap winder and initially winding is done by jogging the drive. The machine can be run at a required speed The CRS machine is chosen as per the specifications of the machine for which the gauge of the sheet forms the important criteria. The specifications of different CRS machines are as follows: CRS I: MAKE : M/S DAS NAGAR, KOLKATTA SPECIFICATIONS : I/P COIL THICKNESS : 0. 25 to 6mm max ID : 500mm OD : 1800mm MAX COIL WT : 10MT O/P COIL WIDTH : 20mm to 710mm NO OF SLITS : 7 max TOL : +/- 0. 15 ID : 400/500mm OD : 1800mm CRS II: MAKE : M/S BOMBAY CRANES PVT. LTD, MUMBAI SPECIFICATIONS : I/P COIL THICKNESS : 100mm to 7. 2mm max ID : 500mm OD : 1800mm MAX COIL WT : 10MT O/P COIL WIDTH : 20mm to 710mm max NO OF SLITS : 7 max TOL : +/- 0. 15 ID : 500mm OD : 1800mm CRS III: MAKE : LYKA INDUSTRIES, KOLKATTA SPECIFICATIONS : I/P COIL THICKNESS : 0. 3 to 1. 2mm ID : 400(500mm) OD : 1600mm MAX COIL WT : 2MT O/P COIL WIDTH : 6mm to 250mm ID : 400(500mm) OD : 1500mm NO OF SLITS : 7 max TOL : + / – 0. 15 CUT TO LENGTH After slitting of CR coils in slitters into required sheet form, it will taken into the C. T. L Units. The coil is fed through leveler and copped to the length required by the customer. The length, width, thickness, quality and the visible defects are checked by the quality department persons. The finished sheets and strips shall be free from harmful defects, such as scale, rust, blisters, laminations, pitting, porosity, cracks or torn edges or any other defects which are harmful to the intended use. The degree or amount of surfaces defects in a coil may be expected to be more than in cut length because of the impossibility of rejecting portions of the coil. This shall be taken into account by the purchaser in his assessment of the material. An excessive amount of defects may lead to the rejection of lot. The sheets shall be reasonably flat and edges cleanly sheared and squared to the specified dimensions. The CTL machine is selected according to the work order i. e. the gauge and size required. The specifications of the machines are: CTL I: MAKE : TATA DAVY LTD. , KOLKATTA MIN WIDTH : 30mm THICKNESS : 0. 4mm LENGTH : 340mm I/P COIL ID : 400/500mm COIL WEIGHT : 7. 5MT max MAX WIDTH : 685mm THICKNESS : 3. 1mm LENGTH : 3000mm I/L COIL OD : 1800mm CTL II: MIN WIDTH : 30mm THICKNESS : 2. 0mm LENGTH : 400mm I/P COIL ID : 400/500mm COIL WEIGHT : 7. 5MT max MAX WIDTH : 720mm THICKNESS : 6. 5mm LENGTH : 3500mm I/L COIL OD : 1800mm CTL III: MAKE : M/S GODREJ, MUMBAI MIN WIDTH : 70mm THICKNESS : 0. 2mm LENGTH : 450mm I/P COIL ID : 500mm COIL WEIGHT : 7. 5MT max MAX WIDTH : 720mm THICKNESS : 1. 6mm LENGTH : 4500mm I/L COIL OD : 1800mm DESPATCH Sheets and strips shall be supplied in coils or bundles of cut length or in packages each weighing not more than three tones as may be agreed the purchaser and the supplier. Sheets and strips shall be packed in water proof paper or polythene lined Hessian and securely tied around with hoop iron. A number of coils may be bundled with wooden patterns in between or may be packed in wooden boxes. Strips may also be packed with separate thin metallic sheets wrapped around and with bands of hoop iron. ———————– PICKLING HR SLITTING INSPECTION RAW MATERIAL ROLLING ANNEALING SKIN PASS MATERIAL TESTING CR SLITTING CUT TO LENGTH PACKING & DESPATCH

Reading averages for school samples serving K-2 Essay

The sample in Table 1 was uncharacteristic of the all three samples. Grade two MCT reading results for the 2005 school year demonstrated lower reading averages in school one which had a lower percentage of impoverished and non-white students. This was not the case in sample two and three. In order to validate these results, the 2005 reading scores were compared to those of 2004 and 2003. As demonstrated in Table 1, school two has consistently scored lower than school one; however, the reading averages for both schools only vary approximately five percent between the years of 2003 and 2005. This is not enough of a variance to determine if ethnic background is a major indication of the difference between reading proficiencies. The researcher also considered class size (FTE) as a factor in the levels of reading achievement. The amount of students per teacher (FTE) however did not appear to have any influence on the reading proficiency levels of schools one and two since the FTE percentage was the same. Table 1 Sample One: Reading Averages for K-2 Schools (Grade 2) ______________________________________________________________________ Reading Impoverished Ethnicity Three Year FTE Average Students (SES) nonwhite Average ______________________________________________________________________ School 1 93 80 54 ~94 15 School 2 92 74 52 ~89 15 ______________________________________________________________________ Note. The state second grade reading average for Mississippi in 2005 was eighty-eight percent. Appendix B Reading Averages for School Samples Serving K-3 Second grade MCT reading averages for the two sample schools differed greatly for the 2005 school year. School 1A demonstrated a much lower second grade reading proficiency, as well as a higher SES. In contrast, school 2A had a low SES percentage and higher test results. The percentage of non-white students was close between the two schools, the highest however was found in school 2A. The FTE in schools one and two differed slightly with school 2A having an average of seventeen students per teacher versus fifteen students per teacher in school 1A. In order to validate the MCT results, the 2005 reading scores were compared to those of 2004 and 2003. The three year average of second grade MCT scores demonstrates that school 2A has consistently had higher test scores than school 1A. This sample demonstrates that the only probable influence on the MCT scores, and reading proficiency in general would be the SES percentage. Table 2 Sample Two: Reading Averages for K-3 Schools Grades 2 & 3 ______________________________________________________________________ Reading Impoverished Ethnicity Three Year FTE Average Students (SES) nonwhite Average ______________________________________________________________________ 2nd 3rd 2nd 3rd _____________ ____________ School 1A 79 75 94 51 80 ~75 15 School 2A 92 98 73 54 ~96 ~95 17 ______________________________________________________________________ Note. The state second grade reading average for Mississippi in 2005 was eighty-eight percent. The third grade reading average for Mississippi was eighty-four percent. Appendix C Reading Averages for School Samples Serving K-5 The following table demonstrates the reading proficiency in the school samples serving kindergarten through fifth grade. The initial sample had results which were very similar and therefore were difficult to compare, thus the researcher investigated the MCT results of another school. As the reader can see from Table 3, there is a drastic difference between schools 1B and 2B and schools 3B and 4B. The percentage of nonwhite students is similar between all four schools, indicating that ethnicity was not a crucial factor in the results of the MCTs. A major indicator of the differences in MCT scores was the SES percentage. In particular, the schools with the highest SES, the higher percentage of impoverished students, performed drastically lower than the schools with a lower SES. This has been a consistent trend over the past three years in all the schools in the sample. The FTE was seventeen for all except one of the four schools. This could indicate that the higher students-per-teacher ratio did not have an influence on the MCT reading results. Table 3 Reading Averages for K-5 Schools Grades 2 & 3. Reading Impoverished Ethnicity Three Year FTE Average Students (SES) nonwhite Average ______________________________________________________________________ 2nd 3rd 2nd 3rd _____________ ____________ School 1B 91 95 53 54 ~91 97 17 School 2B 93 96 57 53 95 97 17 School 3B 67 77 99 52 ~70 81 15 School 4B 69 77 91 53 ~69 ~72 17 ______________________________________________________________________ Note. The state second grade reading average for Mississippi in 2005 was eighty-eight percent. The third grade reading average for Mississippi was eighty-four percent.

Organization Behavior Essay Example | Topics and Well Written Essays - 500 words

Organization Behavior - Essay Example He did not inquire on how much raise he would receive when he was told about the promotion. Being in the company, Michael achieves his goal as an employee and as a person. Michael had a slight setback when he found out that there were a couple of managers, who came in the company later than him, were receiving higher salaries. The only consolation that he was thinking after reading the memo was that he was the one given the largest amount of increase. It seemed that even if he was giving all his best, he was still given the least amount of salary among the employees with the same status as his. There was a point that he wanted to quit his job and look for another that will give him a more competitive salary than what he was receiving. He was faced with the dilemma though that if he does look for another job, he would be starting his career all over again. He also thought of the negative effects the company will have when he does leave it for another. The company might loose bills and clients. He might destroy the company that he helped to build with his goals and visions. One of the reasons why salaries are kept confidential by the company amongst their employees is that it may cause envy and intrigues. It will turn a quiet and productive place into a disruptive one. When Michael and Dave Burton found out about the discrepancies on their salaries, besides the obvious jealousness that they felt, they wanted to leave the company. This is disregarding the fact how the company have helped them and built them to be the employees that they are right now. If ever Michael won’t quit his job, the information that he knew would have positive and negative consequences on him. He can make this information as a motivator for him to strive more. It is not for his boss to see that he would need another promotion but yet letting his superiors see that he also deserves a better compensation just like the other managers. On the other hand, he may get discouraged and become

Customer Service in the Blackshop Restaurant Case Study

Customer Service in the Blackshop Restaurant - Case Study Example Faced with the challenge of abandoning the manual system of managing reservations for the electronic one Alec Cerny had quite a tough decision to make. Â  The CHG was handling a good number of customers on a daily basis and in terms of operational efficiency, this required a very sophisticated system of managing reservations. The main problem to be tackled by the management at HCG was having a very efficient way of managing reservations in order not to lose customers while at the same time avoiding piling of pressure on available resources. The Backshop restaurant and affiliates were still using the manual way for making reservations where the customer could make phone calls and negotiate check on time and table choices with managers. One disadvantage of the manual system was that the information captured was inconsistent and was not easily transferable from day to day. Its transferability required extra labor and as such often was not done. another disadvantage arose especially when there were many customers calling in that anyone could step in and assist the managers; staff taking the reservations sometimes could bow to the press ure of customer when fixing check-in times causing bottlenecks to the bar& kitchen and limiting the restaurant's ability to turn the tables an extra time. Â  Procuring the reservations management software from OpenTable would assure consistency in customer information captured. Going electronic also meant keeping up to date with trends in business and customer service management as the future lies in technology. More people will do their things online in the future and as such it a worthy course. The system will assist the restaurant to save on time, cut costs, improve service, increase efficiency and ultimately attract repeat customers. The software also presents a unique opportunity to develop a good customer database, and allow sharing information between the restaurants.

Research paper Case Study Example | Topics and Well Written Essays - 1500 words

Research paper - Case Study Example The use of drugs is a major problem in the world of sport. Many athletes have been found out using performance enhancement drugs in order to compete or win in their designated sport or area. Hence, â€Å"in today’s competitive sports market, players want to hit more home runs, score more touchdowns, or jump higher than their competitors because their performance will most likely be directly tied to their next playing contract or endorsement deal.† (Pampel, 2007) Drug abuse and performance enhancement drugs (PEDs) is considered as one of the most disputed argument in the world of sport. Therefore, doping is considered as a disruptive behavior from an individual. Also, it is a very secretive behavior. However, it is a very common action that the athletes deny the use of drugs and dopes. For instance, there were many cyclists in the Tour De France of 1998, who had actually doped themselves in order to have an edge over their competitors but they refused this claim when the officials found out. The cyclists had to undergo various tests and many of them were caught using drugs. Basically, drugs in sport are cheating and the combination of drugs and sport do not mix well too. Athletes use drugs in order to have an edge against their competitors and improve and make their performance better which is cheating. This act would not make them better or tell them if they are, to some extent, better than their competitors. â€Å"The use of substances to improve performance in sport has been recorded from as early as the third century B.C. – Greek physician Galen used medicinal preparations to treat disease and illness, and noted that many Olympic athletes at the time used stimulants and diet modification methods to enhance their performance.† (White W and Laura S, 1991) The two controversial debatable points which leads to the conclusion that why performance enhancement drugs (PEDs) and doping should be banned in competitive sports are, firstly, t he factor of fair play from any game and competition is eliminated when an individual is used to take such pills and medication. It helps an individual to improve physical performance and abilities which is contrary to one of the most important aspect of sport which is fair play. â€Å"Athletic competitions, it is argued, are designed to demonstrate the best performer on a level playing-field reflecting natural capacities. It is, therefore, unfair if a particular resource, such as performance enhancing drugs, is available to some competitors but not others† (Sabini & Monterosso, 2005). The second argument to this topic is the disadvantages of such drugs and medication. It is concerning that these pills are damaging and injurious to athlete’s health. As there are various types of drugs which individuals use to enhance their performance include drugs such as anabolic steroids, erythropoietin (EPOs), and human growth hormones (HGOs). All of these have different and harmfu l side effects which could affect the athletes in their future. Cardiovascular and mental health problems, depression and higher risk of heart attack, hypertension, cardiac disease, and overgrow hands, feet, or head. The use of performance enhancement medication allows athletes to perform better than the other. If this is made legal then any sports will not be an even playing field and no

Advantages to employers in instituting family-friendly policies Research Paper

Advantages to employers in instituting family-friendly policies - Research Paper Example A human’s life comes with a lot of responsibilities to fulfill.But these responsibilities sometimes prove to be difficult to manage such as the work life and the family life.But effective work life balance establishes itself to be a win-win situation for both the employer and the employee. It helps to retain the employees and also increase their performance by providing them benefits that makes the juggling between home life and work life easier and flexible. But like every human phenomena, it also has a flipside. The job sharing done to accommodate the work that could not be completed is given to the employees who don’t have children. This makes them to work out two jobs for a single wage. Hence, effective distribution of the work is the key in here. Introduction Life is not easy. There are many spheres in our lives that hold equal importance and hence we need to manage all of them. Our work, our family, our social life and our health are some of the areas that we need to juggle between. Neglecting any of them proves to be harsh on us. New age employers are now understanding this fact and taking initiatives to make work life much more flexible and hence happier, by employing family friendly policies. Today, employing family friendly policies is not just about the happiness of the employees, but it’s also about the attaining the status for an employer which increases his value in the market and gives him a gut above the rest with the help of the tag â€Å"a good employer†. ... This in turn affects their performance as a whole which leads to a dip further in their job satisfaction (Halpern, 2005). If they are not satisfied, this feeling will further have a loading on their personal lives. The stress they experience will have its dire manifestation on their health. Many diseases that can result out of this are hypertension, heart disease, polycystic ovarian disease and so on. This can be seen in times of economic nose-dives such as recession. This was a time where the employees didn’t have a clear idea as to will they retain their jobs the next consequent day or will they be called- off from their jobs. The new age employers understand the importance of keeping employees happy even in the hardest of times because this will lead to greater production for the organization’s stated goals. Some of the family friendly policies can be that the organizations provides coverage for prescription drugs, hospital bills, basic clinician’s expenses an d other paramedical services such as the visits to a psychologist. The juggle between work and family and the tight schedule where in to sit comfortably and contemplate for one’s life becomes a rare luxury. Taking this scenario into account, we need to understand that an employee is also a human being and may also get nasty spells of depression and frustration and hence there might be a need for him to vent out all the anger and pain that is loitering around with him in all his spheres of life, making them even more unmanageable. Here comes a need for a psychologist. A faulty thought pattern may lead to faulty behavioral tendencies. Next Level Games is a Vancouver based organization that understands this fact and gives coverage

Controvirsal of Cancun Essay Example | Topics and Well Written Essays - 1000 words - 1

Controvirsal of Cancun - Essay Example Cancun is however popular around the world and Mexicans take pride of the beautiful sand beaches and resorts found in the area. The beauty and fun experienced in the place has as a result attracted significant numbers of high school graduates from the U.S to make trips to Cancun after graduating more of a sign of a gift from their parents. It is however important to note that some of the students may source for their own funds and pay for the trips on their behalf. The issue has led to controversy over a period of years mostly relating to legalization of alcohol sales to people aged below twenty years. It is however important to note that since Cancun is outside the U.S, the federal states laws relating to sale of alcohol or any other issue are not observed in Cancun. The media is creating controversy about Cancun arguing that parents need to avoid giving high school graduate students free tickets to visit Cancun as alcohol is legally available for people below the age of twenty year s. It is noble for parents to present gifts as recognition of their efforts and achievements upon graduating from high school or any other level. The form of gift given to a majority of high school graduates in the U.S occurs in the form of free tickets for a one week visit to Cancun where students visit with their peers and enjoy the fun experienced in the result. Every year, controversy arises regarding these high school graduate students trips relating to what happens over at Cancun (Nim 213). Despite the feeling from many parents that a trip to Cancun is a good gift to their children upon graduating from high school, there is need to focus on some issues. Although the idea and action is good, observers believe that it is for no healthy reason that the free trip should include fellow graduates as well as friends for a whole week to enjoy and have pure fun and pleasure. The reason behind the

Dangers of wooden trusses to firefighters Research Paper

Dangers of wooden trusses to firefighters - Research Paper Example Fire-fighters risk their lives when putting off fires in buildings that have wooden trusses. This paper will discuss the dangers of wooden trusses to fire fighters. The paper will explore the various risks involved in putting off fires in buildings that have wooden trusses. The dangers of wooden trusses to fire-fighters There are a number of dangers that wooden trusses pose to fire-fighters; these dangers may be  experienced when the fire-fighters make attempts to put-off large fires. A notable danger that wooden trusses pose to fire-fighters is that they can trap the fire-fighters. In such cases, the fire-fighters find it difficult to leave the building. As a result, a rescue operation has to be initiated in order to find the fire-fighters and save them from the building where they may be trapped. Fire-fighters who manage to escape from a building that collapses may suffer numerous injuries, which may last for a lifetime or lead to significant impairment (Pollio, 2012). It is wort h noting that wooden trusses may not pose any risks to the people who occupy buildings. However, these trusses exhibit some form of weakness when there is fire, and they become extremely weak. When there is fire, there tends to be high temperatures that may cause damages to the truss (Pollio, 2012). Since the trusses are held together using fasteners, the high temperatures may weaken the fasteners, thus leading to the failure of the entire truss that may be damaged by the weight of the building. The trusses may fall on the fire-fighters while in their attempts to put off the fire (Dunn, 2010). Some of the features of wooden trusses raise critical concerns regarding the safety of fire-fighters. Wooden trusses tend to expose much of their surface to fire as compared to trusses made of metal. Since the wooden trusses comprise of less mass, there is a possibility that fire will consume them quickly. Moreover, wooden trusses also lose their capacity to carry loads whenever there is a fir e. This also affects the metal plates that may be holding the trusses together. Therefore, wooden trusses can easily collapse when there is a fire, thus putting the lives of fire-fighters at risk. Wooden trusses also pose immense dangers to fire-fighters since they spread fire a fast rate. When one wooden truss catches fire, there is a high probability that the fire will spread to the other trusses very fast. Thus, the spread of fire in the entire building will also be extremely fast, which means that fire-fighters may lose their lives while putting off fires (Brannigan & Corbett, 2007). The future of the materials used or change in fire-fighting tactics In the future, there should be a change in the materials used in constructing

Business research-Second cup Essay Example | Topics and Well Written Essays - 500 words

Business research-Second cup - Essay Example Every employee is trained by baristas (coffee experts) on the various aspects of coffee making, including selection of beans, crushing, roasting and other technical aspects connected with the processing of the beans. Hence, all the employees receive training in all aspects of coffee making, including knowledge about growing of coffee etc. (Starbucks Corporation: Competing in a global market, 2003). Starbucks lays special emphasis on building a unique culture with its people – it believes that its true strength are its employees and therefore, they are given good benefits and remuneration and also given stock options, or ownerships in the Company. (Starbucks Corporation: Competing in a global market, 2003). Starbucks does not offer franchises to anybody nor does it envisage doing franchisee business in the foreseeable future. In the North of America, majority of shops are bought, owned and operated by Starbucks itself; however, in exceptional cases, where real estate ownership may not be forthcoming, such as airport locations, grocery chains and major foodstuff establishments, the Company enters into licentiate agreements with Companies who provide access to these places. However, the shops are manned by Starbucks personnel themselves. (Business opportunities. 2007). The reasons why Starbucks do not franchise is because the franchisees may not be able to maintain the highest standards of quality and service which forms the bulwark of Starbucks’ reputation. However, their competitor, First Cup operates through a chain of franchisees. The main problem with franchisees is that consistency of franchises performance over all the territories have to be maintained, and a greater degree of control has to be established. Franchisee reporting also has to be delineated. The degree of autonomy and chain of command which is available to own staff cannot be extended for the

Two Models of the Criminal Process Essay Example for Free

Two Models of the Criminal Process Essay Abstract   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The Criminal Control Model emphasizes the importance of protecting people, their property, and their rights for the good of the victim and the whole society. The Due Process Model is closer to our democratic ideals, and emphasizes the importance of individual rights at all stages of the Criminal Procedure. The models represent the two different (and contradicting) views on criminal justice and Criminal Procedure Policy. Two Models of the Criminal Process   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Introduction   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Contemporary theory of criminal justice uses the two different criminal justice models – the Crime Control Model and the Due Process Model. Both models were designed by Packer in 1964 and â€Å"embrace constitutional values† (Zalman, 2002). However, these models represent the two different sets of criminal justice values and can never be used simultaneously. Although both models are equally applicable within the democratic political framework, they cause different impact on shaping the Criminal Procedure Policy.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The Criminal Control Model emphasizes the importance of protecting people, their property, and their rights for the good of the victim and the whole society (Samaha, 2005). The Crime Control Model implies that people are unable to fulfill their social functions, if they do not feel safe. Crime control, satisfaction of society’s needs, and discretion create the practical basis of this model. Very often, the Criminal Control Model is compared to the assembly line conveyor belt that moves the endless array of cases and suspects through the criminal justice system (Samaha, 2005). From the viewpoint of the Criminal Control Model, justice should be speedy, correct, and accurate. Under the influence of the Criminal Control Model, the whole Criminal Procedure Policy turns into the power which never makes mistakes and is eager to sacrifice several innocent suspects for the sake of solving the crime.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The Crime Control Model is frequently blamed for assuming that the alleged criminal is guilty before the court takes objective and correct decision. In its turn, the Due Process Model is closer to our democratic ideals, and emphasizes the importance of individual rights at all stages of the Criminal Procedure. Fair procedures form the essence of the Due Process Model: â€Å"fair procedures means decision making according to formal rules growing out of the Bill of Rights and the due process clauses of the U.S. Constitution and state constitutions† (Samaha, 2005). In the Criminal Procedure Policy, the Due Process Model distrusts the power of government and implies that the government’s decisions should be controlled. In many instances, the Due Process is similar to the â€Å"obstacle course†; it is distanced from the idea of unmistakable justice and is based on the â€Å"fact finding† principles (Zalman, 2002). In distinction from the Crime Control Model, the Due Process Model relies on the equal treatment of all defendants and contradicts to the Crime Control Model’s view in that the rights of individuals can sometimes be hindered for the sake of the whole society and justice.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Conclusion   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The Crime Control Model is close to conservative thinking, while the Due Process Model goes in line with liberal democratic ideals. The models represent the two different (and contradicting) views on criminal justice and Criminal Procedure Policy. It is impossible to determine which of the two procedures prevails, but evidently the Due Process Model has proved its superiority in the need to promote fairness of justice, equality of defendants’ rights, and the importance of legal procedures in the process of proving one’s guilt. References Samaha, J. (2005). Criminal Justice. Thomson Wadsworth. Zalman, M. (2002). Criminal procedure: Constitution and Society. 3rd edition. Pearson Education: Prentice Hall.

Hospital Automation System Essay Example for Free

Hospital Automation System Essay The team has planned to develop a Hospital Automation System for the well knownhospital called Pannipitiya Nursing Home. Currently the client company depends on an error   Ã¢â‚¬â€œ prone software system and a large amount of manual work. Development of a new systemwill help the client company to minimize the work load they handle manually and to eliminatethe faults and errors of the existing software system.This proposed system handles the entire hospital work load under seven major functions namely; OPD, IPD, Medical laboratory, Pharmacy and stores, Doctor services, Alertsystem and report generation and Billing system. The new system will be having key benefitsover existing system such as; high performance due to the immediate updating service provided by the system, reduce errors of putting unnecessary purchase orders, access to fullydetailed description about the patient regarding their medical reports, doctors will be pre -alerted about the appointment details of the day and thus the doctor can manage visiting time,reduce human effort and the cost spends to train new employees etc.

External Influences on Health

External Influences on Health Recognize, survey and examine both immediate and aberrant effects on wellbeing the accompanying determinants have with respect to arranging, execution, and the assessment of wellbeing mediation. Demographic distribution of population. The demographic distribution influences the wellbeing straightforwardly and in a roundabout way. Here in New Zealand significant piece of the populace is existing in Auckland. The large portion of vagrants and other individuals are existing in the Auckland area. In this way, the prerequisite of wellbeing office is more in Auckland than different regions of New Zealand. The individuals require more wellbeing office in the urban range. In a few nations populace is high in some territory. In this way, it is hard to give hitter wellbeing office to everybody. In like manner, a few regions are not fitting clean due to the poor offices. It measurements likewise influences the wellbeing models. Some remote territories are far from the fundamental focus where we cant reach there on time to give the best human services offices in a crisis. In India there is more populace of adolescent age. While in New Zealand there are around 50,000 individuals of seniority with the issue of the dementia. Acc ording to one overview it will be around 1, 20,000 following 16 years. Thus, it will be a tremendous issue for the nation to handle it. Political values. Democratization is a crucial to ensure the energy about human rights, social value and worth. As we enter the third thousand years the strategy of democratization is spreading to more countries. The progression, in any case, is reasonably direct. Progress in wellbeing ethics to accomplish quality and reverence human honorability should not to hold up. Attempts to finish esteem in human administrations are ordinarily welcomed even by the most genuine organizations. Pioneers expect an unequivocal part in accepting good guidelines in wellbeing mindfulness that ensure worth, value and adoration for people. Political qualities dosage influence the wellbeing in distinctive way. Political gathering needs to choose the medicinal plan. Moreover, government choose which medication can be sold and which cant be sold in the nation. The political party additionally chooses the expense of the medication and medications free of charge solution. Case in point, in New Zealand natives get free medicat ions after a few solutions. The administration likewise chooses about the healing facility. Quantities of doctors facilities and zone of the healing centre has been chosen by the political party. Political values additionally impacts on the quantity of the restorative and nursing staff introduce in the health awareness unit. Capability of the staff additionally chooses by the administration for the clinics and medicinal services units. Government sets a portion of the criteria additionally for the holding up for an arrangement. Political qualities measurement likewise consequences for the expense of treatment. Like in India treatment of real ailments like tumor, AIDS is free of expense in government clinics. Along these lines, political values additionally have influenced the general wellbeing. Religious beliefs. Religious is the gauge for keep up the wellbeing. Like different religious have their own particular convictions for keep up wellbeing. According to Hinduism individuals like to take plant pharmaceutical instead of visit the specialist. Ayurveda is the book from which Hindu get thoughts to cure the sickness. Hindu individuals accept that they have wellbeing issues as a result of their awful things (Karma) they did. For the Muslim religious there are additionally diverse convictions for the wellbeing issue. Muslim individuals like to consume home sustenance amid their hospitalization. For the customary solution they like to go to Hakim rather than specialists. The populace of Africa are more cognizant about proliferation. In this way, they welcome the sicknesses like AIDS by having the dangerous sex. A large portion of universal individual’s utilization to do appeal to God for recuperation rather than pharmaceutical. The goal of Buddhist practice is to make the mind to its full est potential which incorporates the perfection of sensitivity and learning. Extraordinary success incorporates making a tolerant identity and working with the torment of disorder and death in a maximally perfect way. Buddhist church, and likewise lay specialists are open to help the people who are charmed by these practices. Human values Ethics are grounded on socio-social, philosophical or religious sentiments of what are extraordinary or wickedness. Ethics is considered as the effort to find sensible defence for perceiving what is right or wrong in human exercises and ways of life. In this adoration, ethics is an augmentation between wellbeing game plan and qualities, where qualities are seen as assistants and protections people use for picking destinations, needs and measures. Ethics investigations the moral authenticity of the choice. Quality incorporates both philosophy and conclusion. An operational philosophy would be to assess the impact of specific wellbeing decisions on quality and to ensure that decisions taken do enhance esteem. The progression and affirmation of human rights and of restorative administrations are in a wide sense interfaced. The right of the single individual to get right information empowered authorizing the essential information checks on cigarettes realizing a positive wellbeing and fi scal influence. There has been a creating penchant of late to minimize the inconvenience of social protection on individual human rights. Ethnicity. Ethnicity is a principle thought impacting the soundness of individuals and gatherings. Ethnicity (or ethnic social occasion) delineate various national differences in the way that ethnic get-togethers are delineated, and there is close general assentation that ethnicity is a socially created identity, and not an innately chose and continuing assurance which chooses conduct and the attributes of the individual, things being what they are, enrolment of an ethnic get-together is at risk to gather certain specific wellbeing dangers and needs. For example, the anticoagulation drug carbamazepine now and again causes genuine and even deadly medicine reactions in people of Asian plunge. Clearly, these drug reactions might at present happen in people who are not Asian, and they may not happen in all people of Asian drop. Yet knowing has any sort of impact in how your pro methodologies arrangements. Traditions. All traditions have frameworks of wellbeing feelings to clear up what causes affliction, how it could be cured or treated, and who should be incorporated the entire time. The extent to which patients see calm guideline as having social centrality for them can have a noteworthy effect on their get-together to information gave and their capacity to use it. Western industrialized social requests, for instance, the United States, which see contamination as an eventual outcome of trademark sensible phenomena, advocate therapeutic pharmaceuticals that fight microorganisms or use complex designing to diagnose and treat affliction. Diverse social requests acknowledge that infection is the delayed consequence of supernatural phenomena and push appeal to God or other significant mediations that counter the accepted disfavor of viable powers. Conventional issues accept a genuine part in patient consistence. One study exhibited that a social event of Cambodian adults with immaterial formal prepa ring endeavored huge consultations to take after treatment however did so in a manner unsurprising with their fundamental understanding of how arrangements and the body work. Various African-Americans share in a general public that focuses on the centrality of family and church. There are widened association bonds with grandparents, aunts, uncles, cousins, or individuals who are not naturally related yet who accept a key part in the family schema. Typically, a key relative is directed for key wellbeing related decisions. The assemblage is a vital help steady system for some African-Americans. Identify, assess and discuss both direct and indirect impacts on health the following public attitudes have with regards to planning, implementation, and the evaluation of health interventions. Personality, Attitudes and Health What is Personality? â€Å"We bring our identity with us wherever we go to work, school, in our connections†¦ and so on. Indeed our identities are reflected in all that we do. They are reflected in the TV shows we like to watch, the sustenance’s we consume, the sum we drink, our pastimes, political affiliations So it would just bode well that our identity would affect the route in which we decide to deal with our wellbeing and the way we respond to sickness. What is an attitude? The way you contemplate or act towards some person or something Attitudes Towards Tobacco Control: Context: smoke free Environments (Controls and Enforcement) Amendment Act 2011: Removal of purpose of-offer tobacco item shows: retailers must verify that tobacco items cant be seen by clients in their store. Retailers sees on Tobacco Control Measures and Their Effectiveness (changed perspectives): Most retailers thought the evacuation of tobacco presentations would diminish smoking, and debilitate youngsters from taking up smoking. Different retailers communicated enthusiasm toward giving extra backing to clients who are attempting to stop. A significant number of the retailers backed further tobacco control measures. Most were not restricted to the thought of it being necessary for tobacco merchants to additionally offer quit-supports like Nicotine Replacement Therapy (NRT) including patches, gums. Tobacco industry has anticipated that uprooting tobacco item shows will bring about budgetary misfortunes for retailers and an increment in robberies and security issues. Attitudes Towards Smoking: Overview gathered information to portray staff reactions to articulations identifying with doctors facility smoking: Most (88%) wanted to work in a without smoke environment, in spite of the fact that this was altogether lower in smokers contrasted with non-smokers (39% versus 95%). While most staff felt that the smoke free environment had a positive effect on the wellbeing of patients (86%) and on themselves (79%), smokers were essentially more averse to concur. Smoking boycott can bring about positive wellbeing results for patients and staff, and may impact some staff to stop. Test is the way to convince the individuals who smoke. Analyse and talk about the different impacts that the collaboration between social, social and national and worldwide arrangement may have on the arranging, usage, and assessment of wellbeing intercessions in New Zealand. Patients of Indian Origin: Aged patients expect conscious and respectful treatment as their due. Numerous patients may wear religious stuff which ought to never be evacuated or cut without the assent of the patient or relative including exceptional dress (tupi, a religious top worn by Muslims), hallowed decorations (mangalsutra). Rehearsing Hindus or Sikhs put stock in resurrection – Older patients may accept that diseases are the consequence of terrible karma from past lives thus may be less slanted to hold fast to biomedical regimen Patients of Filipino Origin: Traditional Filipino methodologies coordinate ideas of disease as being the part of malevolence spirits or witches demanding discipline for wrongful deeds. Filipino idea of wellbeing is focused around the guideline of equalization – Tim bang. Particular issue are seen to be brought about by an abundance admission of one sort of sustenance. Chilly sustenance’s, for example, numerous foods grown from the ground may achieve disease and pallor. Many seniors utilize a double arrangement of human services, mixing advanced pharmaceutical with traditional practices and standards. Filial devotion and admiration for seniors is exceptionally solid in Filipino families. Families may be hope to be included and may hope to be furnished with significant data in regards to treatment plans. Patients of Africa and Zimbabwe: Perspectives of men and ladies who accepted they were potential conceptive disappointments by not having the socially expected numbers and sorts of youngsters in Zimbabwe. The implications of conceptive disappointment and their connections to neighbourhood convictions and society, sexual conduct and sex characters, and HIV counteractive action. A distraction with origination undermined the selection of what are right now viewed as more secure sexual practices. In looking to overcome what was seen as conceptive disappointment, men, and ladies to a lesser degree, participate in unprotected sex with various simultaneous and serial accomplices. Such practices are given significance by long-held nearby convictions concerning the imperativeness of childbearing for people and for the more extensive group. Traditional Filipino methodologies incorporate ideas of sickness as being the part of malice spirits or witches demanding discipline for wrongful deeds. Filipino idea of wellbeing is focused around the standard of equalization – Tim bang. Particular issue are seen to be brought about by an abundance admission of one sort of sustenance. Frosty sustenance’s, for example, numerous products of the soil may realize malignancy and weakness. Traditions, Religion and Health: Implications for Health Policy Planning, Implementation and Evaluation. Tradition and Culture: Wellbeing policymaking, execution and assessment must be educated by the social and conventional connections Well-being data that is socially proper to its target group is more successful than data that disregards society Conventional medications must be regarded. Recognize social, religious practices from the place where you grew up and layout how they may affect on wellbeing policymaking and execution. References Retrieved from http://www.humiliationstudies.org/documents/GabrHealthEthics.pdf Retrieved from http://www.ucema.edu.ar/u/je49/capital_humano/Murphy_Topel_JPE.pdf Retrieved from https://www.health.govt.nz/system/files/documents/publications/cornwallanddavey.pdf Retrieved from http://www.medschool.lsuhsc.edu/physiology/docs/Belief%20and%20Traditions%20that%20impact%20the%20Latino%20Healthcare.pdf A Buddhist Approach to Patient Health Care Kusala Bhikshu. (n.d.). Retrieved from http://www.urbandharma.org/udharma8/health.html Assessing the impact of political, economic, socio-cultural, environmental and other external influences | Health Knowledge. (n.d.). Retrieved from http://www.healthknowledge.org.uk/public-health-textbook/organisation-management/5b-understanding-ofs/assessing-impact-external-influences The effects of religious beliefs on the health c [Nurse Pract. 1986] PubMed NCBI. (n.d.). Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/3446212 Ethnicity and health Wikipedia, the free encyclopaedia. (n.d.). RetrievedOctober1, 2014, from http://en.wikipedia.org/wiki/Ethnicity_and_health How culture influences health beliefs. (n.d.). Retrieved from http://www.euromedinfo.eu/how-culture-influences-health-beliefs.html/ How Your Ancestry and Ethnicity Affect Your Health — Health Hub from Cleveland Clinic. (n.d.). Retrieved from http://health.clevelandclinic.org/2014/03/how-your-ancestry-and-ethnicity-affect-your-health/

Of Mice and Men :: essays research papers

In John Steinbeck’s novel, Of Mice and Men, he uses Crooks to express loneliness because his character is a perfect example of how it was to be a black man. Steinbeck uses Crooks to show his readers what it was like to be lonely. Crooks is the loneliest in the novel because he has no one to talk and he is black.   Ã‚  Ã‚  Ã‚  Ã‚  Crooks was introduced to the novel as just a black stable buck. Before his character appeared, the men talked about him as if he were a horse, and they made fun of him because he walked with a limp. He had a limp because he was kicked in the spine by a horse once. When he finally showed up, it was just to receive an order, and the way he did it seemed like he was a frightened animal, terrified of his owner’s whip. He had no one to talk to, no one to keep him company and no one to treat him like he was important. In chapter 4, Lennie goes into Crooks’ room and they start talking about being lonely. Crooks says to Lennie †Ã¢â‚¬â„¢Books ain’t no good. A guy needs somebody ___ to be near him.’ He wined, ‘A guy goes nuts if he ain’t got nobody. Don’t make no difference who the guy is, long’s he’s with you’†(72). This shows you how lonely Crooks gets all by himself with nothing to do but re ad. Even though it seems like he is talking about any guy that is lonely, he is expressing what he feels inside. That is one of the many examples that shows how Crooks feels.   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  In the nineteen thirties, the Great Depression occurred. It was a time when money was scarce, lots of people lost their jobs and became poor, and sometimes homeless. Crooks did hard labor and obeyed every command given by the boss. If he lost his job, he would have no where to go. No one would hire anybody because of the money problem in that time, and if they did, it wouldn’t be a black man, let alone, a crippled black man. So Crooks was basically stuck in the same place for awhile, and he was without anybody to talk to. At least being a stable buck he had people around him most of the time. In chapter 4, Crooks and Lennie have a conversation about Crooks being a black.

King Lear :: essays research papers

Reaction to Gibbons, Cold Comfort Farm I found the ending to Aunt Ada Doom's story a very Austen-like way of dispelling the myth of the Madwoman in the Attic. And, of course, Flora gets this idea from Mansfield Park. The madwoman, who isn't truly mad to begin with, can be cured with something as simple as a copy of Vogue and a trip to Paris. There is no ongoing psychological torment or dramatic death. Madness can be cured by good, old-fashioned materialism. Perhaps Bertha Rochester could have undergone the same "therapy." Elfine's wedding reception also seems to be a way of putting down Victorian psychological drama and upholding Austen's purism: There they all were. Enjoying themselves. Having a nice time. And having it in an ordinary human manner. Not having it because they were raping somebody, or beating somebody, or having religious mania or being doomed to silence by a gloomy, earthly pride, or loving the soil with the fierce desire of a lecher, or anything of that sort. No, they were just enjoying an ordinary human event, like any of the millions of ordinary people in the world. (217) Lastly, Flora's marriage plot also seemed reminiscent of Austen. Her love affair with Charles is not the primary focus in the novel. Cleanliness, manners, and fashion take precedent before everything else. Only when Flora has cleaned up Cold Comfort and cleansed the farm of its Victorian characteristics can she pursue her own marriage plot. What I love most about Cold Comfort Farm is also what makes it difficult to write about. Gibbons takes many conventions, especially those of the Victorian novel, and turns them on their head. We never learn what Aunt Ada Doom saw in the woodshed, nor why Judith is depressed (besides her weird Oedipal complex for Seth). We never find out about the question of Flora's rights or what happened between her father and his relatives. Gibbons builds up these possibilities for psychological drama and deflates them all by the end of the novel. Her humorous style, and her deflation of all that is psychological and dramatic, really gives the text and Austen-like feel. King Lear :: essays research papers Reaction to Gibbons, Cold Comfort Farm I found the ending to Aunt Ada Doom's story a very Austen-like way of dispelling the myth of the Madwoman in the Attic. And, of course, Flora gets this idea from Mansfield Park. The madwoman, who isn't truly mad to begin with, can be cured with something as simple as a copy of Vogue and a trip to Paris. There is no ongoing psychological torment or dramatic death. Madness can be cured by good, old-fashioned materialism. Perhaps Bertha Rochester could have undergone the same "therapy." Elfine's wedding reception also seems to be a way of putting down Victorian psychological drama and upholding Austen's purism: There they all were. Enjoying themselves. Having a nice time. And having it in an ordinary human manner. Not having it because they were raping somebody, or beating somebody, or having religious mania or being doomed to silence by a gloomy, earthly pride, or loving the soil with the fierce desire of a lecher, or anything of that sort. No, they were just enjoying an ordinary human event, like any of the millions of ordinary people in the world. (217) Lastly, Flora's marriage plot also seemed reminiscent of Austen. Her love affair with Charles is not the primary focus in the novel. Cleanliness, manners, and fashion take precedent before everything else. Only when Flora has cleaned up Cold Comfort and cleansed the farm of its Victorian characteristics can she pursue her own marriage plot. What I love most about Cold Comfort Farm is also what makes it difficult to write about. Gibbons takes many conventions, especially those of the Victorian novel, and turns them on their head. We never learn what Aunt Ada Doom saw in the woodshed, nor why Judith is depressed (besides her weird Oedipal complex for Seth). We never find out about the question of Flora's rights or what happened between her father and his relatives. Gibbons builds up these possibilities for psychological drama and deflates them all by the end of the novel. Her humorous style, and her deflation of all that is psychological and dramatic, really gives the text and Austen-like feel.

Free Essays - The Stranger (The Outsider) :: Camus Stranger Essays

The Stranger What is life for? Different religions have different takes on life. There are many ways to view life. The way life is viewed by an individual is the way his morals are set. Christianity, Islam, Judaism, and many other religions believe that a higher god sets morals and with the morals comes reward. Another camp, the existentialist, believes that life is absurd and meaningless. The existentialists believe humans live and humans die. They state that death is just a matter of time for everyone, a reality that is inescapable. In the novel The Stranger by Albert Camus, Meursault realizes that death is a subject that cannot be erased. Meursault comes to the conclusion that death is the end result for every human's life. The nurse tells Meursault how the weather affects the human body. "She says, `If you go to slowly, you risk getting sunstroke. But if you go to fast, you work up a sweat and then catch a chill inside the church'"(17). The heat's effect is inevitable. No matter the pace, the weather is still an influence in the human body. Meursault realizes this and responds with " She was right. There was no way out" (17). Most people have a problem with destiny. They have been raised to be in control of their circumstances or their decisions. Therefore, the average person has a hard time coming to the realization that the inevitable will happen. Meursault kills an Arab. He is convicted for the murder. While in the courtroom Meursault is asked why he killed the Arab. The only response Meursault could give them was the sun. Meursault said, "I never intended to kill the Arab" (102). The judge replies and Meursault "blurted out that it was because of the sun" (103). Meursault did tell the truth, the sun did affect his judgment. Camus writes, "The sun was starting to burn my cheeks...it was burning, which I couldn't stand anymore, that made me move forward" (58-59). The Arab gets up and shows his knife. Because of the sun he is blinded in two ways. The first reason was because of the sweat in his eye. The second reason was because the knife was reflecting the light into Meursault's eyes.

Grade 8 Graduation Speech

Grade 8 Graduation Speech Hello, graduating class of 2012! Good evening and welcome to all the parents and families who have came to this graduation ceremony today. Our parents are the people who know us the best in the whole world, even if that seems hard to believe, it's true. They've helped us become the people we are today, and they've done a great job. After all, we wouldn’t be here without them. So, thank you, parents. Today, June, 26th, 2012, is the day that we, as a class, are going to graduate the eighth grade. Of course, we all know that. But do we really understand what it all means?The definition of graduation is to complete a class or course of study. That’s it, the original definition of graduating. To me, graduation means more than that. It means growing, it means changing, and it means moving on. Today, the ceremony might seem like it's all happening too fast, or, it might seem like it's never going to end, but all our lives we'll remember it, and that's what counts. My two years of middle school have been a time to remember, I’ve learned a lot during my time in middle school, and these memories are what we are going to remember for the rest of our lives. For me, it all started on the first week of September.All I saw was these big guys playing basketball and soccer and I was wondering whether or not I will be able to fit in. Everyone else was eagerly waiting for the first school bell to ring after like 3 months of summer while I was just standing there looking everywhere as if I was lost. Eventually, all of these started to change as I started to know people better. Thing was, they weren’t as furious or mean as I thought they might be. In the beginning of the school year, I used to nervously switch classes without actually knowing where to go, but now I am familiar with this school like all the others.I managed to develop many new skills and stuff during grade 7. Before I knew it, it was June, grade 7 ended, and to m y surprise, I'd survived my first year of school in Regent Heights. When we came back from a 3 month long summer, I knew what more teachers would expect from me. 8th grade began. We were the oldest, and the wisest. It was a completely different experience for me, with all the testing for specialised program registrations. It required you to know quite few stuff ahead of what you were being taught.After all of that, term 2 came to an end, and we all started setting goals to do well on the next term. Many activities were held during spring. And as usual, it came to an end. We grew as teams and as a grade, but more importantly as people—figuratively and literally. We became smarter, more confident, and of course, taller. Together, we listened as the guidance counsellors told us about the high school and together we looked over the seemingly endless lists of classes. We turned in our worn, wrinkled, class sheets nervously, but a couple months later, all our worries were gone.Toda y, we will graduate together, in a matter of minutes, leaving behind a school, a grade, our team, and some great, great teachers. Together we will enter the high school next fall, and in four years we’ll graduate again. Senior year will be just like this one, but the intensity will be higher. I’m excited to enter high-school, I’m pretty sure it will be fun. And, I'm sure that we can handle all of it: the teachers, the seniors, and of course, the homework. So, it's time for our graduation. Here, now, today, we're ready, even though we might not know it. Let's go, and let's make today a day that we'll remember forever.

Newman’s Sermon

A summary 1.  Ã‚  Ã‚  Ã‚  Ã‚   Faith presumes. Reason examines. 2.  Ã‚  Ã‚  Ã‚  Ã‚   Because we believe one thing it is easier to believe the next. 3.  Ã‚  Ã‚  Ã‚  Ã‚   Faith and Reason have different starting points. 4.  Ã‚  Ã‚  Ã‚  Ã‚     Faith has a bearing on practice. 5.  Ã‚  Ã‚  Ã‚  Ã‚   Faith is presumption rather than proof. 6.  Ã‚  Ã‚  Ã‚  Ã‚   We cannot inherit faith but must acquire it for ourselves. 7.  Ã‚  Ã‚  Ã‚  Ã‚   To have Faith is to test oneself. 8.  Ã‚  Ã‚  Ã‚  Ã‚   Religion won’t convince someone who doesn’t want to be convinced. 9.  Ã‚  Ã‚  Ã‚  Ã‚   What we believe is based upon our previous experience. 10.   Faith is a test of character not of intellect. 11.   Reason is opposed to Faith, but so is unbelief. 12.   Faith doesn’t depend upon intellectual ability. 13.   There seems to be no rule about what to believe and what not. A safe guard is there needed. Many think this should be education. Faith is then an act of reason. Not so. Faith’s safeguard is a right state of heart. 18 and 19. Personal faith is the way to eternal life. 20. Because we love we can recognise the love of the Saviour. 21.We believe because we love. 22,23,24. Examples from scripture. 25. Holiness and love will keep us safe and on track. 26. Faith is an act of reason and based upon a presumption prompted by love 27. Faith turns us away from evil towards good. 28. Lack of faith leads to disobedience. 29. For the Christian faith supercedes sacrifice because of the atonement. 30. For many Christians their faith is tinged with superstition. 31. We should act on faith   and so not be misled as to what is God’s will. 32. Gospel truths cannot be contradicted by modern ideas. 33. Paul said the   gospel was the fulfilment of the law. 34. Judaizers first believed, but clung to law. 35. The Gospel completes the faith of the Jews. 36. It builds on what is revealed by nature 37. True faith is moving from the unknown to the known, from darkness to light. 38. That is all we need. Love, the safeguard of faith against superstition â€Å"The sheep follow Him, for they know His voice. And a stranger will they not follow, but will flee from him, for they know not the voice of strangers.† John 10 v. 4, 5. 1.Looked at logically Faith has this characteristic – it presumes, it trusts, rather than looking at evidence, rather than by measuring and examining. This is what distinguishes it from Knowledge as we use that word in our everyday lives. We say we know something when we have found it out by natural methods. We can be said to know a mathematical fact when we can demonstrate it to be true. We know that things are present because we sense them. We know about events that take place by using our moral judgement and so judge them to be good or bad. We know about the past and things we will never see by the evidence that we find . When for instance we hear testimony of a miracle occurring from honest men who are neither being deceived or out to deceive us we may be said to know what they testify to as fact. We know about the nature of the case because of the Evidence and when we believe in a miracle because of such Evidence we can be said to believe because of reason. 2. By using our reason we look at the evidence and we believe, and because we believe one thing we can go forward and believe something else. In the general sense Faith is this kind of knowledge – a presumption based on evidence. But as in earlier discourses Reason can be contrasted with Faith as meaning what can be inferred from evidence and which therefore leads to knowledge. 3. Faith is based on presumption and Reason on factual knowledge. Reason makes the fact that is to ascertained the most important point [1].It then looks at the evidence available. It doesn’t exclude what has gone before [2], but doesn’t begin with that. Faith has a different starting point. It begins on a basis of previous knowledge and opinions which, though they may not lead to exactly the same conclusion tend towards it. To take a step of faith is to act before absolute certainty. It could be said to be against Reason or even to triumph over Reason, to take hold of what Reason sees as beyond its reach. Faith is beyond argument, and so is not capable of being argued against and cannot defend itself by using logic i.e. it seems illogical. 4. So why are we bothering with it. Because I believe that Faith has a bearing on practice. Our text was ‘The sheep follow him because they know his voice.’ Their faith leads them to follow. 5. As things turn out day by day we see that Faith is a judgement made by reaching out towards facts, a presumption in their proof, rather than a search for proof. There is no doubt that for the vast majority of sincerely religious   who stake their happiness upon Faith, do so not from examination of the facts , but from a spontaneous move of the heart. They reach out to meet with God despite the fact that they can’t see him. They discern his presence in symbols that are provided [3]. They may perhaps later examine more closely the evidence on which their faith is founded and see whether or not they are justified in believing, but their faith did not begin with the evidence, nor is it affected by the strength of their knowledge,[4] although it may be strengthened by such knowledge. They believe because of something within themselves, not basing their faith only on what Religion teaches. 6. Many Christians can be said to have merely inherited the Faith. They need a faith of their own. 7. Everyone needs to test his own Faith rather than merely accept what he is told. 8. Not that such evidence is deficient, but whether of true religion or a false one the evidence for or against religion is not of the kind that will convince someone against his will. I don’t mean that the evidence has no value one way or another, for or against Christianity, but that few people, in the bustle of their daily lives, have time to consider all the evidence before making decisions. Most of us, most of the time, make judgements by stepping out and meeting the evidence to a greater or lesser degree.[5] 9. This is the way in which we make judgements, because we cannot do it any other way. We act upon only part of the evidence. We make judgements based on the way we feel, how credulous we are, and what seems feasible and safe often based on our previous experience. It is the same with religious experiences. When we apparently experience the supernatural we judge it according to how much we want to believe it. Such judgements are based upon such things as our views of life and our knowledge of the miraculous. We decide whether or not something is true according to how the alleged miracle fits into our existing religious life and knowledge. 10. These religious judgements are not exactly like those we make in our ordinary lives. Evidence about worldly matters is all around us and our minds are not necessarily capable or discrimination between truth and falsehood. Religious facts are fewer in number and of a different kind and the powers we use to judge them are correspondingly stronger. Even the wisest person can make worldly judgements that are wrong, and go against the evidence available, but this does not necessarily mean that even the most ordinary intellect need be wrong in making judgements about the more important kingdom of heaven. I believe that a merciful God are so ordered things that faith, based on presumption, will lead to the same conclusions as if, as the minority do, we carefully examine the evidence. I am not speaking of the trustworthiness of Faith, but of its nature. Faith is a test of moral character. This is the essence of religious faith as opposed to Reason, which by its nature excludes prejudice or what we want to happen in favour of carefully examining the facts. We make multiple decisions on the way when using reason, before we come to a fixed conclusion. This means that there is little merit in getting   the right answer in, for example , a mathematical problem or indeed little guilt involved in making a wrong decision because of a faulty memory. 11. So we see Faith as being opposed to Reason, but we must not forget that Unbelief is also opposed to Reason. Unbelief considers itself to be totally logical, but when it comes to questions of religion Unbelief criticizes the evidence not in a logical way, but because it doesn’t suit. It makes presumptions in a similar way to that which Faith does, but in a negative rather than a positive way. It is the opposite of Faith. It considers religion to be so impossible that it fails to see the evidence. Unbelievers consider themselves rational beings, but they do not decide by evidence. They just make decisions and stick with them. Hume,[6] in the case of alleged miracles, said ‘What have we to oppose†¦..but the absolute impossibility or miraculous nature of the events†¦.’ Hume   sees improbability as sufficient reason for denying the evidence, but presumptions made on either the   side of Faith or Unbelief cannot, by their nature, be proved. Hume went on to say of Faith, ‘Mere Reason is insufficient to convince us of its veracity. 12. Faith   is an exercise of presumptive reasoning which is open to all and does not depend upon intellectual ability. If the majority believe, not because of careful examination of the evidence, but because they are ‘ordained to eternal life’ then this must be the way that God wants it. There may be difficulties with our Faith, but let us face up to them and so overcome them. 13. Such a view of Faith may be made an excuse for all kinds of bigotry and lead to superstition. There seems to be no rule for what is to be believed and what not. If we are to accept the miracles and Revelations of Christianity why not those of other faiths? 14. So a safeguard is needed if Faith is not to become superstition.   The consensus seems to be that if you educate people about their Faith and encourage them to reflect you will avoid fanaticism and superstition. 15. If this is so then Faith is an act of Reason. 16.Yet I deny that any intellectual act is necessary for right Faith, that it needs to be more than a presumption or that it necessarily needs to be fortified by education. The safeguard of Faith is a right state of heart. It is holiness and love which is the principles behind true faith. 17.18.19. Christ is the way into the kingdom of God. Knowing him in a personal way and following him in Faith is the way to eternal life. 20. The Jews didn’t love Christ   and so were unable   to see him as Saviour. Just as a child trusts his parents because of the affection he receives so we believe because we love . 21. Just as sheep do not follow a stranger so we won’t be misled if we know and follow Christ. We believe because we love. 22. This doctrine is expounded in several places such as Ist Corinthians 2 which teaches us the worthlessness of natural Reason. 23.24. Other examples from scripture. 25. Holiness and love are what keep us on track and prevent us getting caught out by things that are wrong. 26. Right Faith is the Faith of a right mind. It is an intellectual act, an act of reasoning based upon presumption and stirred into action by a spirit of love and purity. We will recognise true Revelation because it not be in opposition to the nature of God. 27. Superstition is the worship of evil spirits. Faith is an instinct of Love towards both God and man. It will cause us to turn from what is evil and towards what is good. 28. Lack of faith leads to disobeying God’s laws. 29. However what is superstition for a Jew or Christian is not necessarily so for a heathen   who is not bound by the rules of his Faith. Blood sacrifices for a heathen are not   necessarily superstitious, but for the Christian they have been superseded by the   blood of Christ in the Atonement. 30. Take the example of the viper which bit St Paul on Malta. The people might have been mistaken in believing him to be a god, but at least they were aware of the possibility of heavenly intervention in human life. They weren’t Christians but they recognised the presence of God with Paul. 31. The woman with an issue of blood. Was that superstition? Her action did not fit with what she knew. She recognised in Jesus someone who could save her, yet she stayed on the edge. She didn’t want to bother him. Yet Christ commended her faith . In her faith tinged with superstition and humility we see many believers through the ages, who impair their true vision of God by concentrating on outward emblems. 32. In I Kings 13 we have the story of prophet of Judah who was credulous enough to be misled by the lying prophet. Not   a well known story, but an important one as it reminds us that even God’s people can be led astray. 33 It is not Faith but superstition that leads to stories of omens, charms and so on. We have found Christ already. If the doctrine of today contradicts that which has already been revealed we must disguard it or face the consequences. 34. That was what the Judaizers did. They received the Spirit but went back to the Law. Paul fought against such ideas and   proclaimed that the Gospel was the true fulfilment of the Law. 35. In the case of the heathen he paid respect to their beliefs, but tried to show how the Gospel was the completion of Faith.[7], a fulfilment of what had already been revealed to them by nature. This is real Faith, a moving forward, closer to God. A move from the known to the unknown. It is made perfect not by intellect but by obedience, the act of a pure, obedient and devout mind. 37.This is sufficient. [1] As when a scientist states the hypothesis which his experiment will prove [2] As when Newton said ‘I stand on the shoulders of giants.’ [3] Such as the bread and wine of communion. [4] And so is not affected by their intellectual capacity – a child may have faith and so may a university don. [5] As when we meet someone for the first time and make judgements about his character based on only a brief acquaintance. [6] David Hume, Philosopher, ‘An enquiry concerning human understanding’. [7]   Acts 17 v 16 ff.